32” x 23”x 37”/30” / 81 x 58 x 94/76 cm
Seat height: 13.5" (high) / 9" (low)
KEEP CHAIR OUT OF UV LIGHT WHEN NOT IN USE. DO NOT LEAVE OUTSIDE PERMANENTLY.
Assemble chair frame by inserting all uprights (x4) and legs (x4) into the hub sockets. Make sure each pole is fully inserted.
Install chair seat on assembled frame by fully pushing corner pockets into the uprights (x4). Ensure proper assembly before sitting in chair.
PRO TIP: To adjust your chair to the low position, fold in each leg as shown and snap feet to aluminum base poles.
Make sure the elastic cord is fully threaded into the slot in the chair hubs. Do not sit on elastic cord.
With proper care, your chair will provide countless hours of relaxation.
• Extend the lifetime of your chair by storing in a cool dry place when not in use. Do not leave outside permanently. Extensive UV and elemental exposure will damage chair and cause discoloration.
• Thoroughly rinse chair and frame with fresh water if exposed to salt water, sand, dirt, or mud. Ensure each hub is free and clear of any obstructions or debris.
• For general cleaning, hand each in cold water using a mild detergent. Do not machine wash, heat dry, or dry clean.
• After cleaning or rinsing, always allow chair and frame to fully air dry before storage.
• Prevent damage by removing sharp items in your pockets.
• Keep away from open flames/embers. Chair materials may be flammable.
For more information on product safety and proper use, visit our Product Safety Page.
32” x 23”x 37”/30” / 81 x 58 x 94/76 cm
Seat height: 13.5" (high) / 9" (low)
KEEP CHAIR OUT OF UV LIGHT WHEN NOT IN USE. DO NOT LEAVE OUTSIDE PERMANENTLY.
Assemble chair frame by inserting all uprights (x4) and legs (x4) into the hub sockets. Make sure each pole is fully inserted.
Install chair seat on assembled frame by fully pushing corner pockets into the uprights (x4). Ensure proper assembly before sitting in chair.
PRO TIP: To adjust your chair to the low position, fold in each leg as shown and snap feet to aluminum base poles.
Make sure the elastic cord is fully threaded into the slot in the chair hubs. Do not sit on elastic cord.
With proper care, your chair will provide countless hours of relaxation.
• Extend the lifetime of your chair by storing in a cool dry place when not in use. Do not leave outside permanently. Extensive UV and elemental exposure will damage chair and cause discoloration.
• Thoroughly rinse chair and frame with fresh water if exposed to salt water, sand, dirt, or mud. Ensure each hub is free and clear of any obstructions or debris.
• For general cleaning, hand each in cold water using a mild detergent. Do not machine wash, heat dry, or dry clean.
• After cleaning or rinsing, always allow chair and frame to fully air dry before storage.
• Prevent damage by removing sharp items in your pockets.
• Keep away from open flames/embers. Chair materials may be flammable.
For more information on product safety and proper use, visit our Product Safety Page.
With shocked-corded 6061 anodized aluminum, the ENO Lounger DL sets up in seconds and can be adjusted to sit high or low, giving you two solid, sturdy options wherever you go.
The redesigned Lounger DL features custom hubs with a fixed base to cut setup and breakdown time in half while the included adventure-ready backpack gives you more space to pack up.
With hammock inspired seat construction, integrated head pillow, and cushioned armrests. The Lounger DL is the most nap-worthy chair on the market.
With an integrated cup holder and stretch cargo pockets, the Lounger DL keeps essentials in reach.
The Lounger DL
our most
versatile and
nap-worthy chair.