ENOpod® Hammock Stand
Hammocks SOLD SEPARATELY
NOT compatible with spreader bar hammocks
Hammocks SOLD SEPARATELY
NOT compatible with spreader bar hammocks
Whats Included:
A: x3 Curved Ground Section
B: x6 Curved Section
C: x3 Stand Head
D: x6 Stainless Steel Carabiners
Assemble the stand by connecting the tubing sections in the order as shown in the drawing above. Make sure each connection point fully snaps together before use.
Make sure each carabiner clicks closed and visually check that the gates are closed before use. Always use the included stainless steel carabiners when connecting your ENO hammocks to the ENOPod stand. Never attach Aluminum carabiners to any metal hammock stand.
Gently lower yourself into the ENO hammock to determine if adjustments are needed to achieve a hanging height of 18" (45cm) or less, and a hanging angle of approximately 30 degrees.
For more information on product safety and proper use, visit our Product Safety Page.
Our SingleNest, DoubleNest, TechNest, JungleNest, and Sub-series hammocks are compatible with the ENOpod. For your safety, use the stainless steel carabiners included with your hammock stand. Toggle system hammocks (Sub-series, JungleNest) require adding the stainless steel carabiners to attach it to the stand. Please note: Spreader bar hammocks including the SkyLoft, SkyLite, and SuperNest are only compatible with the SoloPod XL Stand.
Whats Included:
A: x3 Curved Ground Section
B: x6 Curved Section
C: x3 Stand Head
D: x6 Stainless Steel Carabiners
Assemble the stand by connecting the tubing sections in the order as shown in the drawing above. Make sure each connection point fully snaps together before use.
Make sure each carabiner clicks closed and visually check that the gates are closed before use. Always use the included stainless steel carabiners when connecting your ENO hammocks to the ENOPod stand. Never attach Aluminum carabiners to any metal hammock stand.
Gently lower yourself into the ENO hammock to determine if adjustments are needed to achieve a hanging height of 18" (45cm) or less, and a hanging angle of approximately 30 degrees.
For more information on product safety and proper use, visit our Product Safety Page.
Our SingleNest, DoubleNest, TechNest, JungleNest, and Sub-series hammocks are compatible with the ENOpod. For your safety, use the stainless steel carabiners included with your hammock stand. Toggle system hammocks (Sub-series, JungleNest) require adding the stainless steel carabiners to attach it to the stand. Please note: Spreader bar hammocks including the SkyLoft, SkyLite, and SuperNest are only compatible with the SoloPod XL Stand.
The ENOpod offers tool-less construction and optional permanent hardware.
Built to last, the ENOpod will be the sculptural mainstay of your outdoor space.
Compatible with ENO portable hammocks; holds 3 hammocks.
COMPATIBLE
WITH ALL ENO
HAMMOCKS