Lay your SunFly over the area you wish to cover. Stake out each corner approximately. 4’-5’ (1.2-1.5m). Ensure each stake is fully inserted at an angle for optimum anchoring strength.
Extend the first adjustable pole to your desired height and hand-tighten each pole section to lock in place. Insert the pole cap into one of the two stretch pockets located on the bottom corners of the shade. Tighten the adjustment cord as needed so the pole is stable.
Insert the other pole at the opposite end (B) and repeat step 2 from above. Slightly angle the feet of each pole inward for optimal stability. Ensure the peak of the shade between poles A and B is fully tightened before tightening the remaining corners (C + D). Go around the shade adjusting each corner until your SunFly is properly tensioned like the image above.
PRO TIP 1: On windy days, face the front of the SunFly in the direction of the wind. Lower the height of the rear pole or remove rear pole completely to improve stability.
PRO TIP 2: Loop the optional ridgeline hooks located on the stretch pocket corners around two trees or other anchor points for quick shade or shelter over your hammock or to create a more open shelter at camp.
With proper care, your shade will provide countless hours of protection.
• Extend the lifetime of your shade by storing in a cool dry place when not in use. Storing your shade in hot temperatures for long periods of time can damage material coatings. Always make sure your shade is dry before storing to prevent mildew growth.
• For light cleaning, use a sponge and warm water (not hot) and allow fabric to air dry. Do not machine wash or tumble dry. For more thorough cleaning, apply a waterproof gear specific wash and gently work into fabric with sponge. Rinse thoroughly and hang to dry.
• Do not leave outside permanently. Extensive UV and elemental exposure will damage the shade and cause discoloration.
• Keep away from open flames/embers. Components may be flammable.
For more information on product safety and proper use, visit our Product Safety Page.
Lay your SunFly over the area you wish to cover. Stake out each corner approximately. 4’-5’ (1.2-1.5m). Ensure each stake is fully inserted at an angle for optimum anchoring strength.
Extend the first adjustable pole to your desired height and hand-tighten each pole section to lock in place. Insert the pole cap into one of the two stretch pockets located on the bottom corners of the shade. Tighten the adjustment cord as needed so the pole is stable.
Insert the other pole at the opposite end (B) and repeat step 2 from above. Slightly angle the feet of each pole inward for optimal stability. Ensure the peak of the shade between poles A and B is fully tightened before tightening the remaining corners (C + D). Go around the shade adjusting each corner until your SunFly is properly tensioned like the image above.
PRO TIP 1: On windy days, face the front of the SunFly in the direction of the wind. Lower the height of the rear pole or remove rear pole completely to improve stability.
PRO TIP 2: Loop the optional ridgeline hooks located on the stretch pocket corners around two trees or other anchor points for quick shade or shelter over your hammock or to create a more open shelter at camp.
With proper care, your shade will provide countless hours of protection.
• Extend the lifetime of your shade by storing in a cool dry place when not in use. Storing your shade in hot temperatures for long periods of time can damage material coatings. Always make sure your shade is dry before storing to prevent mildew growth.
• For light cleaning, use a sponge and warm water (not hot) and allow fabric to air dry. Do not machine wash or tumble dry. For more thorough cleaning, apply a waterproof gear specific wash and gently work into fabric with sponge. Rinse thoroughly and hang to dry.
• Do not leave outside permanently. Extensive UV and elemental exposure will damage the shade and cause discoloration.
• Keep away from open flames/embers. Components may be flammable.
For more information on product safety and proper use, visit our Product Safety Page.
Adapt and adjust your sun shade to your environment with flexible pitch points and adjustable poles easily covering your chair, hammock stand, and more.
Set up your No-Knots-Needed sun shade canopy quickly and easily in a wide array of locations from in between trees or other anchor points with included optional ridgeline hooks.
Set up your portable outdoor sun shade anywhere your adventures take you with included XL ground stakes and durable, telescoping all-terrain poles with custom caps.
Your
personal
oasis,
anytime,
anywhere.