SuperNest™ Hammock
Compatible with SoloPod XL Stand
Compatible with SoloPod XL Stand
Ensure spreader bars and pillow are properly assembled with ENO hammock and fully inserted in corner pockets before use.
Connect carabiners to ENO hammock stand, hammock straps or anchor points that can safely support the ENO hammock and its occupant(s), and that are structurally approved for load bearing of 400+ lbs (182kg). Make sure each carabiner clicks closed and visually check that the gates are closed before use.
Gently lower yourself into the ENO hammock to determine if adjustments are needed for a hanging height of 18" (45cm) or less, and a hanging angle of appx. 30°. Carefully read all stand or hammock strap instructions before use with the ENO SuperNest Hammock.
PRO TIP: Attach Safety Tether System to improve the safety and stability of your ENO hammock when using an ENO hammock stand.
With proper care, your ENO hammock will provide countless hours of relaxation.
• Keep it out of direct UV light when not in use and store dry in a cool place.
• Prevent damage by removing sharp items in pockets and debris from shoes.
• Hammocks are flammable; keep away from open flames and embers.
• Get it dirty? Remove carabiners, hand wash in cold water with mild detergent, and hang dry.
For more information on product safety and proper use, visit our Product Safety Page.
Our spreader bar hammocks are only compatible with the SoloPod XL. The SkyLoft and SkyLite will require you to use the provided chain links at each end of the stand. Be sure to use the steel carabiners included with your stand.
All ENO hammocks are compatible with our hammock hanging kits. However, they must only be installed and used indoors or under covered areas. Do not install and use hanging kits in exposed areas outside. Be sure to use the steel carabiners included with the Hammock Hanging Kit, and any toggle system hammock will require a set of carabiners (sold separately) to use the Deluxe Hanging Kit. Be sure to account for the length of your hammock when installing a hanging kit.
Ensure spreader bars and pillow are properly assembled with ENO hammock and fully inserted in corner pockets before use.
Connect carabiners to ENO hammock stand, hammock straps or anchor points that can safely support the ENO hammock and its occupant(s), and that are structurally approved for load bearing of 400+ lbs (182kg). Make sure each carabiner clicks closed and visually check that the gates are closed before use.
Gently lower yourself into the ENO hammock to determine if adjustments are needed for a hanging height of 18" (45cm) or less, and a hanging angle of appx. 30°. Carefully read all stand or hammock strap instructions before use with the ENO SuperNest Hammock.
PRO TIP: Attach Safety Tether System to improve the safety and stability of your ENO hammock when using an ENO hammock stand.
With proper care, your ENO hammock will provide countless hours of relaxation.
• Keep it out of direct UV light when not in use and store dry in a cool place.
• Prevent damage by removing sharp items in pockets and debris from shoes.
• Hammocks are flammable; keep away from open flames and embers.
• Get it dirty? Remove carabiners, hand wash in cold water with mild detergent, and hang dry.
For more information on product safety and proper use, visit our Product Safety Page.
Our spreader bar hammocks are only compatible with the SoloPod XL. The SkyLoft and SkyLite will require you to use the provided chain links at each end of the stand. Be sure to use the steel carabiners included with your stand.
All ENO hammocks are compatible with our hammock hanging kits. However, they must only be installed and used indoors or under covered areas. Do not install and use hanging kits in exposed areas outside. Be sure to use the steel carabiners included with the Hammock Hanging Kit, and any toggle system hammock will require a set of carabiners (sold separately) to use the Deluxe Hanging Kit. Be sure to account for the length of your hammock when installing a hanging kit.
We spent 3 years developing prototypes and testing weather-resistant materials to create a unique design that hangs in a class of its own.
The SuperNest features a curved spreader bar made from anodized aluminum that contours the hammock in 2 directions to increase comfort, safety, and stability.
The SuperNest pairs perfectly with our Apollo Hammock Straps or SoloPod XL Stand, creating a seamless setup that can transform any outdoor space into a relaxation oasis.
Compatible
with most
hammock
stands 14-15’
in length