SkyLoft™ Hammock
*Hammock Straps SOLD SEPARATELY
*Hammock Straps SOLD SEPARATELY
The ENO SkyLoft Hammock uses lightweight aluminum spreader bars and a specialized toggle system, which allows you to switch between “relax” and “sleep” modes, to create a hammock experience unlike any other.
Body: 7' x 3 / 2.1 x 1 m
Total: 12'8" x 3' / 3.9 x 1 m
FAILURE TO ADHERE TO THESE INSTRUCTIONS/GUIDELINES MAY RESULT IN SERIOUS INJURY OR DEATH.
Find two living, mature trees (or solid anchor points) approx. 14-18 feet (4.25-5.5 meters) apart that can safely support the ENO hammock and its occupant(s).
Attach carabiners to straps making sure each carabiner clicks closed and visually check that the gates are closed before use.
Gently lower yourself into the ENO hammock to determine if strap adjustments are needed to achieve a hanging height of 18" (45cm) or less. Relax...
To switch to "Relax" mode, exit ENO hammock and pull the toggles on each side of the spreader bar up and pass them through the dedicated loops in the suspension lines. To return to "sleep" mode, exit the ENO hammock and undo the toggles, then pull the release tabs on each side downward.
The Skyloft's stuff sack doubles as a pillow, just stuff and snap to hammock.
For maximum comfort, don't hang your ENO hammock too tight.
Our spreader bar hammocks are only compatible with the SoloPod XL. The SkyLoft and SkyLite will require you to use the provided chain links at each end of the stand. Be sure to use the steel carabiners included with your stand.
The Fuse will work with all gathered end ENO Hammocks (the SkyLoft, SkyLite, and SuperNest are NOT compatible; TechNest users should adjust or remove the rolltop stuff sack to properly attach Fuse in between the carabiner and hammock.). Remember the Fuse requires two (2) hammocks and two (2) sets of hammock straps. Be sure to clip the Fuse to the rope between the hammock body and carabiner/toggle. Do not attach the Fuse directly to the carabiner or suspension system.
All ENO hammocks are compatible with our hammock hanging kits. However, they must only be installed and used indoors or under covered areas. Do not install and use hanging kits in exposed areas outside. Be sure to use the steel carabiners included with the Hammock Hanging Kit, and any toggle system hammock will require a set of carabiners (sold separately) to use the Deluxe Hanging Kit. Be sure to account for the length of your hammock when installing a hanging kit.
Due to the overall length and spreader bars, we recommend either a ProFly XL or a ProFly XL Sil rain tarp.
The SkyLoft is not compatible with any ENO bug nets. The SkyLite is a great spreader bar hammock option that includes an integrated bug net.
The ENO SkyLoft Hammock uses lightweight aluminum spreader bars and a specialized toggle system, which allows you to switch between “relax” and “sleep” modes, to create a hammock experience unlike any other.
Body: 7' x 3 / 2.1 x 1 m
Total: 12'8" x 3' / 3.9 x 1 m
FAILURE TO ADHERE TO THESE INSTRUCTIONS/GUIDELINES MAY RESULT IN SERIOUS INJURY OR DEATH.
Find two living, mature trees (or solid anchor points) approx. 14-18 feet (4.25-5.5 meters) apart that can safely support the ENO hammock and its occupant(s).
Attach carabiners to straps making sure each carabiner clicks closed and visually check that the gates are closed before use.
Gently lower yourself into the ENO hammock to determine if strap adjustments are needed to achieve a hanging height of 18" (45cm) or less. Relax...
To switch to "Relax" mode, exit ENO hammock and pull the toggles on each side of the spreader bar up and pass them through the dedicated loops in the suspension lines. To return to "sleep" mode, exit the ENO hammock and undo the toggles, then pull the release tabs on each side downward.
The Skyloft's stuff sack doubles as a pillow, just stuff and snap to hammock.
For maximum comfort, don't hang your ENO hammock too tight.
Our spreader bar hammocks are only compatible with the SoloPod XL. The SkyLoft and SkyLite will require you to use the provided chain links at each end of the stand. Be sure to use the steel carabiners included with your stand.
The Fuse will work with all gathered end ENO Hammocks (the SkyLoft, SkyLite, and SuperNest are NOT compatible; TechNest users should adjust or remove the rolltop stuff sack to properly attach Fuse in between the carabiner and hammock.). Remember the Fuse requires two (2) hammocks and two (2) sets of hammock straps. Be sure to clip the Fuse to the rope between the hammock body and carabiner/toggle. Do not attach the Fuse directly to the carabiner or suspension system.
All ENO hammocks are compatible with our hammock hanging kits. However, they must only be installed and used indoors or under covered areas. Do not install and use hanging kits in exposed areas outside. Be sure to use the steel carabiners included with the Hammock Hanging Kit, and any toggle system hammock will require a set of carabiners (sold separately) to use the Deluxe Hanging Kit. Be sure to account for the length of your hammock when installing a hanging kit.
Due to the overall length and spreader bars, we recommend either a ProFly XL or a ProFly XL Sil rain tarp.
The SkyLoft is not compatible with any ENO bug nets. The SkyLite is a great spreader bar hammock option that includes an integrated bug net.